|
ES-1024A Receiver
Features
-
The ES-1024A two-channel receiver contains two 35 amp
normally-closed, single-pole, dry-contact power relays for switching line voltage
(Class 1) loads.
-
Designed for water heaters, heat circuits, dryers or other
electric resistance loads as well as line voltage control circuits or large,
high-power loads.
-
Can be alternately equipped with two 30 amp normally-closed
double-pole relays for switching a total of four line voltage circuits.
-
The first relay output (channel) is addressable to any odd-numbered
control point of the Energy Sentry® demand controller. The second relay
output (channel) is the next successive control point number.
-
On/off commands mirror the on/off commands of the selected
Energy Sentry control points.
-
Packaged in a 10"x8"x4" NEMA 1 enclosure and
mounts using standard electrical hardware (Also available in NEMA 3R
enclosure).
|
