|
ES-1022A Receiver
Features
-
The ES-1022A two-channel receiver contains two 5 amp
normally-closed, dry-contact outputs for switching low voltage (Class 2)
signals.
-
Designed specifically for controlling heat pumps where the
first relay output controls the compressor and the second relay output
controls all resistance heat strips by interrupting thermostat control
circuit.
-
The first relay output is addressable to any odd-numbered
control point of the Energy Sentry® demand controller, and the second relay
output is the next successive control point number.
-
On/off commands mirror the on/off commands of the selected
control points.
-
Packaged in a 4"x4" fiberglass box and mounts
easily using a 1/2" chase nipple.
|
